Replacement and attachment parts
EILZURR motorcycle lashing system for BMW, Ducati, KTM and MV AGUSTA
- fixation and stabilisation
- Made in Germany
- high-strength anodised aluminium
Anti-theft "Safety Box plus”
- galvanised metal housing
- for trailers in braked and unbraked states
- can remain on the trailer during driving
- incl. round lock with 2 keys
Breakaway brake cable for braked car trailers
- Trailer brake cable for securing
- with mounting hooks and eyelets
- 100 kg tensile force
- appropriate for all overrun brakes
Breakaway brake cable for braked car trailers
- Trailer brake cable for securing
- with mounting hooks and eyelets
- 100 kg tensile force
- appropriate for all overrun brakes
Coupling cover “BLACK NOSE”
- to protect your bumper from scratches
- cold- and heat-resistant
- break- and tear-resistant
- Black
Drawbar box / storage box made of aluminum plate (volume 21 liters)
- Capacity: 21L
- Size: 56x21x25cm
- made of aluminum plate(2.0 / 3.5 mm thick)
- Includes tension lock with lock and two keys
Drawbar box / storage box of galvanised steel sheet SMALL (volume 15 liters)
- Fassungsvermögen: 15 l
- Größe: 50x15x20 cm
- aus verzinktem Stahlblech (GALVALUME = 1 mm stark)
- maximale Belastung / Nutzlast: 10 kg
Protective cap for trailer hitch
- for protecting your car’s trailer hitch
- with STEMA stamp
- cold- and heat-resistant
- break-and tear-resistant
Support legs / trailer legs incl. ORIGINAL STEMA holder
- aus verzinktem Stahlblech
- inkl. originaler STEMA-Halterung, Klemmschelle und Feststellschraube
- inkl. Montagematerial
- ca. 150 kg / Stütze belastbar
Support wheel with plastic rim
- tube diameter: 4.8 cm
- solid rubber tires with plastic rim depending on version incl. holder and mounting material
- total length 62 cm
- load capacity up to150 kg while stationary
Quad bike access ramps incl. guide rail
- made of galvanised steel
- conveniently stored behind the license plate holder
- Size (L x W): 198 x 26 cm
- Load capacity: 200 kg / ramp
Motorcycle access ramp incl. guide rail
- made of galvanised steel sheet
- stored conveniently behind the license plate holder
- size (L x W): 198 x 26 cm
- 400 kg belastbar
Aluminium access ramps incl. guide rail
- made of aluminium
- 26.5 cm wide
- 1000 kg and up load capacity
- 260 cm and up length
Drawbar box / storage box of galvanised steel sheet LARGE (volume 67.5 liters)
- storage capacity: 67.5 l
- size: 90x30x25 cm
- made of galvanised steel sheet (GALVALUME = 1 mm thick)
- maximum load / payload: 50 kg
Drawbar box / storage box of aluminium (volume 154 x 108 cm)
- storage capacity: 67,5 l
- made of aluminium (2 mm thick)
- maximum load / payload: 50 kg
- incl. comfort rotary tension fastener and 2 keys
Access track for 550 and 750 kg box trailer
- made of galvanised steel sheet
- incl. mounting material
Access ramp “light”
- made of galvanised steel sheet
- Size (L x W): 149 x 20 cm
- 300 kg load capacity
- incl. mounting material
Aluminium access ramps incl. shaft for 3-sided dump trailer (SHDK)
- made of galvanised steel sheet
- Size (L x W): 250 x 26.5 cm
- Load capacity: 2700 kg / pair
- incl. mounting material
Front wheel holder bracket for motorcycles and scooters
- electrogalvanised
- available in two different versions
- incl. mounting material
folding telescopic crank supports
- made of galvanised steel sheet
- foldable
- Bearing capacity: 1300 kg / support leg
- Height: 43 cm
Rear wall / tailgate / side wall flap rear
- aus verzinkten Stahlblech oder Aluminium
- für verschiedene Kasteninnenmaße
- inkl. Scharnieroberteile und ggf. die passenden Verschlüssen
- Originalrückwand laut Fahrzeugidentnummer
Perforated beam for blocking rod
- made of galvanised steel sheet
- beam dimensions (L x W): 74 cm x 9.9 cm
- 8 integrated holes
- incl. mounting material
Winch with cable
- 350 kg tensile load
- manual force 200 N
- cord 10 m long
- incl. mounting material
Additional floor for car transporter FTAK / FHAK
- pre-drilled
- waterproof
- glued multilayer wood
Coupling cover “RED NOSE”
- to protect your bumper from scratches
- cold- and heat-resistant
- break- and tear-resistant
- Red
Access track for cart transporter FHAK / FTAK
- made of galvanised steel sheet
- Size (L x W): 205 x 30 cm
- Load capacity: 600 kg / ramp
- incl. mounting material
Brake chock / wheel chock with holder
- high quality, light and stable plastic
- incl. holder and mounting material
- 22.5 x 9 x 10 cm
- max. 800 kg wheel load
Access track for motorcycle trailer “classic"
- made of galvanised steel sheet
- dimensions (L x W): 194 cm x 19.5 cm
- 400 kg loadable
- incl. mounting material
Heavy load support wheel fully automatic
- Tube diameter: 6,0 cm
- Solid rubber tires and steel rim
- Wheel is automatically or manually foldable
- incl. mounting material
Drawbar cover / cover for coupling & overrun device
- against contamination and for protecting the brake system
- UV-resistant
- incl. fastening hooks and cord
Anti-theft key lock for handle
- Secured in coupled state
- goes in on top of the coupling handle
Anti-theft “Safety Box”
- galvanised metal housing
- for trailers in uncoupled state
- incl. round lock with 2 keys
Aluminium access ramp “Model B” 340 kg
- 340 kg load capacity
- folded up length: 117.5 cm
- total length: 225 cm
- width: 31 cm
Aluminium access ramp “Model C” 680 kg
- 680 kg load capacity
- Folded up length: 114 cm
- Total length: 223 cm
- Width: 28.5 cm
Angle lever fastener
- galvanised steel sheet
- with automatic spring protection
- depending on version with screwable eyelet (matching piece for fastener)
Angle lever fastener with red handle
- IMA-Test rating completed with “very good"
- galvanised steel sheet with rubber handle
- red safety
- with fastener eyelet (counterpart for fastener)
Back and front corner post for 550 & 750 kg trailers
- made of galvanised steel sheet
- for left and right sides
Bag of screws for fenders
- inkc. mounting plate
- for zinc fender HMHR 1766 + HMHR 2066
- for plastic fender HMK 1766 + HMK 2066
Bag of standard parts / screws for 550 and 750 kg wooden floor
- as a replacement
- incl. screws, nuts, square spacers and rivets
Bulkhead / Front wall (fixed)
- made of galvanised steel sheet or aluminium
- for various internal box widths
- Original side wall according to vehicle identification number
Bulkhead / front wall (foldable)
- made of galvanised steel or aluminium
- for various internal box dimensions
- with hinges and fasteners depending on model
- original rear wall according to vehicle identification number
Clamp for support wheel or stand leg
- for support wheel or support legs with 4.8 cm or 6.0 cm DIA
- made of galvanised steel sheet
- with 2-hole base plate
- incl. locking screw with rubber protection on the handle
Corner brace vertical for internal box dimensions up to 117 cm
- pre-drilled
- available in various dimensions
Cover cord / cover cord / cord for flat and high covers
- for secure cover mounting
- incl. appropriate clamps or hooks
Cover repair set
- for repairing small holes or cracks
- available in various colors
- 2x (15 x 15 cm) cover fabric
- 1x (30 x 30 cm) cover fabric
Crossbeam / cross-connectors as of June 2011
- for various platform widths
- incl. threaded plugs
- DIA 2 cm
- as of manufacturing year 06/2011
Drawbar handle / foot
- for standing up your car trailer
- made of galvanised steel sheet
- incl. 4 plastic spacers
Drawbar holm / V - drawbar
- made out of galvanised steel sheet
- pre-drilled
- individually exchangeable
Expander cord / cover cord / cord for high cover
- for secure cover mounting
- incl. appropriate hooks
Fender / wheel case / mudguard made of galvanised steel sheet
- made of hot-dip galvanised steel sheet
- individually usable right or left
- partially equipped with mud flaps
- 1 piece
Fender / wheel case / mudguard made of plastic
- light and robust
- made of plastic
- individually usable right or left
- partially equipped with mud flaps
Fixed side wall / side panelling
- made of galvanised steel sheet or aluminium
- for various internal box lengths
- Original side wall according to vehicle identification number
Floor support / crossbeams / cross braces
- stabilisation of the floor
- for various internal box widths
Folding side wall / lateral panelling
- made of galvanised steel sheet or aluminium
- for various internal box lengths
- Original side wall according to vehicle identification number
Garage stand Stema Retro Trailer
- galvanised steel sheet
- space-saving positioning of the trailer
- only for the model Retro
Grease cap / dust cap
- 3 cm high
- bearing protection cap
- made of galvanised steel sheet
- available in three different versions
Hand pressure pump FLEX-e-PUMP
- - Drive: hexagon nut 8mm
- - for single-acting cylinders
- - Recommended speed: 1000 - 1500 rpm
- - recommended oil qualities: HLP32 - HLP46 / ISO VG32-46
Hinge base and blade
- made of galvanised steel sheet
- for mounting side walls
- incl. mounting material
Hinge bolts with securing loop
- galvanised
- appropriate for trailer series FH, FT and SySTEMA
Holding plate for 100km/h sticker
- made of aluminium sheet
- for ATOUR Grande
- for WOM (STS)
Knob for jockey wheel
- including snap ring / circlip
- Material: plastic knob
- Manufacturer: Knott
License plate holder / rear light holder
- made of galvanised steel sheet
- available in various sizes
Longitudinal connector centered
- individually usable right or left
- for various internal box lengths
Mud flaps / mud guards
- made of black rubber with STEMA imprint
- protection from splashing water
- weather-resistant
- incl. mounting material
Original STEMA - holder for support leg
- made of galvanised steel sheet
- original STEMA holder
- incl. mounting material depending on design
Parking caution sign
- Red - Whitefoldablefor driver’s sidefor front or backRequired by German traffic regulations (Road Traffic Regulations) night-parking trailers
Replacement floor plate / wooden floor for car trailers
- original zugeschnittener Boden
- vorgebohrt
- wasserfest
- seitlich versiegelt
Retrofit / repair kit high cover: buckles and straps
- 15 cm long and 2 cm wide
- incl. mounting material
- as retrofitting kit or as replacement
Round lock for Safety Box und Safety Box XL
- made of hardened stainless steel
- 2 matching keys included
Side wall belt / lashing belt “Tex Grip”
- length: 3100 mm
- width: 50 mm
- durable polyester webbing
- rubberised end fittings = no damage to your side wall
Socket holder made of plastic
- made of black plastic
- prevents contamination and damage
- for 7- und 13-pole sockets
Support legs / swivel legs for motorcycle trailers
- made of galvanised steel sheet
- incl. mounting material
Support wheel with integrated parking brake
- additional safety against unintentional rolling
- tube diameter: 4.8 cm
- solid rubber tires with plastic rim
- incl. holder and mounting material
Support wheel with integrated support display
- continual control of the support load during loading
- pipe diameter: 4.8 cm
- solid rubber tires with plastic rim
- incl. holder and mounting material
Support wheel with steel rim
- Tube diameter: 4.8 cm
- Solid rubber tires on steel rims
- Depending on version incl. holder and mounting material
Telescopic support
- made of galvanised steel sheet
- incl. standard parts
- loadable to ca. 1500 kg in an upright and even position
- Product group: MU.T, REX, Systema Low loader unbraked
Tension fastener
- galvanised steel sheet
- 15 cm long and 3.6 cm wide
- incl. yellow tube cap and mounting material
Tension fastener with hooks
- galvanised steel sheet
- 21 cm length and ca. 4 cm width
- incl. mounting material
Threaded plugs for high frames
- round
- made of black plastic
- for tubes with a 20 mm DIA
- Set = 6 pieces
Transport track with access ramp for STLP 850
- Access track: 198 x 26 cm, loadable up to 400 kg
- Transport track: 210 x 27 cm
- incl. front wheel holder
- incl. tension fastener
Wheel bearing set (550 kg trailer)
- for 550 kg trailers
- available in various sizes
- ORIGINAL replacement product
Wheel bearing set 750 kg trailer
- for 750 kg trailer
- available in various sizes
- ORIGINAL replacement product
Wheel for support wheel single with plastic rim
- Solid rubber or air tires
- with plastic rims
- up to 150 kg load capacity
- DIA 200 or 260 mm
Wheel for support wheel, single, with steel rim
- Solid rubber or air tires
- with steel rims
- up to 150 kg load capacity
- DIA 200 or 260 mm
Wheel holder rocker for STEMA stand rail
- galvanised steel sheet
- appropriate for tire sizes 16" bis 18" and wheel widths from 9 cm to 12 cm
- incl. standard parts
- Tare weight: 2 kg
Wire cable / arrestor cable with carabiner hooks (retrofit set)
- wire cable with double eyelet
- 25.5 cm cable length
- incl. carabiner hooks